Book Now for the Make UK Manufacturing Exchange

Make UK’s exclusive Exchange events take place four times a year and offer local businesses the opportunity to hear about cutting edge industry trends in manufacturing, explore the facilities at the state-of-the-art Technology Hub, get advice on business growth and meet industry experts. At the company’s December event you have the chance to meet experts from Supply Chain Academy and National Physical Laboratory. They will be delivering interactive workshops and answering any questions you may have. In addition there will be also a chance to have a Q and A session with current Make UK Apprentices. Come and get involved and network with like-minded people over some festive mince pies and mulled wine. AGENDA 2pm Welcome drinks and registration 2.15-3.15pm Presentation and interactive session – ‘The impact of supply chain disruption’ delivered by Neil Roll & Paul Stone from Supply Chain Academy 3.30-4pm Presentation/Q and A on Metrology delivered by Keith Bevan from NPL 4-4.15pm Apprentice Q and A session 4.15-5.15pm Festive refreshments, networking and charity raffle in the business lounge – marketing area Visit this link to book your free place for the Make UK Manufacturing Exchange event. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News Manufacturing & Engineering Magazine (MEM), is a the leading UK based monthly print & digital publication focused on promoting innovation in manufacturing and engineering available here in the UK. We cover : SUSTAINABILITY (Waste & Water Management, Recycling, Energy); INMOTION (Rail, Marine, Aerospace, Automotive, Defence); INFRASTRUCTURE (Oil & Gas, Nuclear, Construction); Healthcare (Medical), TECHNOLOGY(Printed, Connected, Software, Composite); MANUFACTURING (Chemical, Metals, Plastics, Electronics, Electrical); CONSUMER GOODS(Furniture, Electrical, Electronics, Food) to name but a few. We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally). Our focus is aligned across the next 12 months with our global media partnerships around Trade Events and also contains original content.
Leyland Trucks Preparing for Annual Charity Bike Ride

More than 120 staff from Leyland Trucks and sponsors are preparing to saddle up for its annual Factory to Festival charity cycling event on Saturday 15th June to raise funds for St Catherine’s Hospice. Aptly titled after the range of DAF commercial vehicles that are manufactured by Leyland Trucks, this year’s challenging XF route will see elite riders cycle 115 miles of idyllic Lancashire countryside, complete with an arduous 8,000 ft climb. The CF cycle ride comprises 80 miles through the beautiful Trough of Bowland, which involves an approximate 5,000 ft ascent, whilst novice riders and cycling enthusiasts, together with their families and friends, will take on the LF, which covers the Preston Guild Wheel. All three routes begin at Leyland Trucks’ advanced manufacturing facility and end at Worden Park at around 4pm, to form part of the day’s Leyland Festival celebrations. The annual fundraising event, which is organised by Leyland Trucks’ charity committee, Helping Hands, has already raised more than £12,000 through entrance fees and commercial shirt sponsorship, with its partners including Leyland Packaging, Goodyear, Lancashire DAF, Atlas Copco, Essential Industrial Services, South Ribble Borough Council and Maxion Wheels. “We’re championing every one of our team members and are proud to have so many riders taking on this year’s Factory to Festival challenge, which will be a formidable feat as our biggest cycling event yet,” explained Matt Kersey, Chairman of the Helping Hand Committee at Leyland Trucks. “St Catherine’s Hospice has touched so many of our colleagues, whose family members, friends and even themselves, have at some point relied on their outstanding services during difficult times. All the money we raise will make a considerable difference in helping to futureproof their service provision, especially when a large majority of the Hospice’s running costs are funded solely by donations.” “There will definitely be some healthy competition on the day from our riders, and we want to thank everyone’s huge generosity so far in helping us to raise a fantastic sum of £12,000 before the cycle ride has even taken place.” “We’re fully committed to supporting a number of good causes and work hard to ensure that all the activities we do make a tangible difference to the local community. Cycling fever is sweeping the factory and it’s gearing up to be an exciting day of riding.” If you would like to donate to the charity event, visit the Factory to Festival JustGiving page at: www.justgiving.com/campaign/factorytofestival Helping Hands is managed by a committee of Leyland Trucks employees with a focus on creating a lasting positive legacy across Lancashire. Since it was founded in 1994, Helping Hands has raised more than £1 million for local charities, organisations and projects. Leyland Trucks is once again a sponsor of this year’s Leyland Festival and its communications manager, Steve Whelan, is also a festival committee member. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
Showcase Innovation at the UK’s Largest Annual Engineering Event

Advanced Engineering is on the lookout for start-ups to showcase their inventions as part of its innovation zone. As the UK’s largest annual exhibition for manufacturers and supply chain professionals, the Enabling Innovation Zone will support smaller enterprises that are eager to accelerate their innovations into the advanced manufacturing and technology industries. Supported by Innovate UK/KTN, Advanced Engineering is searching for growing businesses to exhibit their disruptive technologies and inventions on the show floor. Start-ups across all engineering sectors, whether that be aerospace, automotive, marine, medical, automation or any other industry, are encouraged to apply. We expect to see some of the most exciting technologies including novel materials, automotive and autonomous technologies. The opportunity, which is free of charge for successful applicants, will give innovators a platform to showcase their inventions to thousands of key industry players from a range of notable companies. From senior directors and engineers to research and development specialists, chief technology officers and investors, a wealth of influential people spanning across the world’s most renowned manufacturing businesses will be visiting the zone. Successful applicants will receive a branded plinth in the Enabling Innovation Zone to display their technologies, along with full marketing support in the show’s catalogue, on its website and across its PR campaigns. During the show, exhibitors have the chance to gain further recognition as visitors will be able to vote for their favourite innovation, with the winner announced ahead of the show’s closure. “Following the success of the Enabling Innovation showcases, this dedicated zone will act as a springboard for new and exciting technologies,” explains Jeremy Whittingham, Head of Marketing at Advanced Engineering. “As we are establishing an entire area of the show for such innovative businesses, the impact the zone will have is bound to surpass that of previous years and encourage the growth of even more innovations”. Previous showcases have been instrumental in accelerating business growth. Listed in Forbes 30 Under 30 Class of 2017, previous winner Aceleron has revealed that the showcases played a key role in the company’s business development. “It played a crucial part in establishing our credibility and had a direct impact on at least five business relationships we have today”, said the advanced lithium battery developer. Is your business ready to showcase its innovation? To submit an application, please complete this short form or email Jeremy.whittingham@easyfairs.com. For more information visit www.advancedengineeringuk.com Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
NPL MMN Event: Robotics and Automation

NPL MMN Event: Robotics and Automation : Attend this event to gain an understanding of who is using robotics & automation, how they are used and how you may be able to use these technologies to make your business more productive. Robots and automation have been used in manufacturing for a long time, but predominantly in larger businesses. Emerging technological developments have led to more flexible, capable and lower cost systems which is leading to a greater integration into smaller manufacturers. Find out how robotics and automation are used by manufacturers, by hearing from users of these technologies and systems integrators. Hear about where research into these technologies is heading and what we can expect to emerge from this. Network with like-minded businesses and with the speakers. Complimentary food and drink will be available on the evening and free parking will be available on a first come first serve basis from 5:15pm. More information regarding speakers and lab tours will be released ASAP. Date And Time Tue, 9 July 2019 17:30 – 19:30 BST Location National Physical Laboratory 3M Buckley Innovation Centre Firth Street Huddersfield HD1 3BD NPL MMN Event: Robotics and Automation Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
Sapura Group Becomes Host Operator at CCW

The Host Operator for TCCA’s Critical Communications World (CCW) 2019, the world’s premier event for critical communications professionals has been confirmed as Sapura Group, Malaysia’s leading technology organisation. CCW will be held in Kuala Lumpur from 18th-20th June 2019 and MEM is the UK & Ireland official media partner. “CCW is the established annual showcase for the latest developments in critical communications, and the platform for shaping the future of this market. As official Host Operator, we are delighted to welcome the event and all attendees to Malaysia, and to demonstrate the strengths of our region to the critical communications world,” commented Mohd Zarif Hashim, Sapura Group COO. Sapura operates the Government Integrated Radio Network (GIRN) which utilises some 600 TETRA base stations to serve more than 40,000 Public Protection and Disaster Relief (PPDR) users in 16 agencies throughout Malaysia. With technology central to Sapura’s six key business areas, the company’s unwavering commitment to R&D, innovation and building capability has enabled it to be globally competitive in the provision of secured communications solutions for the security enforcement and defence industry, as well as across commercial vertical markets such as oil and gas, railway, manufacturing and aviation. “The Sapura Group has a true commitment to the delivery of critical communications requirements and is a long-standing TCCA member,” said Tony Gray, TCCA Chief Executive. “We are delighted that Sapura has agreed to be Host Operator for CCW, and we look forward to working with the Sapura team and their Malaysian Government and agency customers to ensure that the invaluable work of the critical communications industry reaches the widest possible global audience.” CCW 2019 will be held at the Malaysia International Trade & Exhibition Centre (MITEC). Positioned as an economic catalyst and gateway to Southeast Asia, MITEC spans more than 45,000 m2 of purpose-built exhibition space and triple volume exhibition halls. The venue is the largest trade and exhibition centre in Malaysia. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
Register for this Year’s Automechanika Birmingham

The UK’s must-attend automotive exhibition returns with a larger presence in 2019 before going biennial Automechanika Birmingham is set to return to the NEC from 4 to 6 June 2019, with many major industry players signed up to exhibit. Following hot on the heels of the 2018 event, which saw 86 percent of visitors having purchasing authority, next year’s event has attracted widespread support from across the UK automotive industry. It will be the last time the event runs before going biennial, alternating years with Automechanika Frankfurt. Major suppliers committed to the 2019 event include: Schaeffler, ZF, DENSO, Delphi Technologies, Valeo, Bosch, Hella, Bilstein Group, MANN + HUMMEL, NGK and Yuasa. “The automotive industry deserves its own event and Schaeffler is proud to partner with Automechanika Birmingham 2019. Having successfully established itself as the industry’s exhibition, the event has positively changed the way we as a trade think about and approach exhibitions. We fully support the event’s decision to move to a biennial frequency and encourage others to get behind the event in 2019,” said Nigel Morgan, Managing Director, Schaeffler Automotive Aftermarket. In 2019, Automechanika Birmingham will return for a fourth time and expects to house 600+ exhibitors with more than 12,000 visitors attending. While a new layout is being planned for 2019, visitors to the event will continue to benefit from the hugely successful Garage Quarter, the facilitated meetings programme and SMMT events. This, alongside industry focussed seminars, networking opportunities and the opportunity to launch new products, makes Automechanika Birmingham a must for automotive companies. “The event will go biennial from 2019 – we’re already experiencing a high demand from companies wanting to exhibit to ensure they see the market before 2021,” said Jack Halliday, Automechanika Birmingham’s Head of Sales. Register today and secure your spot at Automechanika Birmingham: https://automechanika-birmingham-2019.reg.buzz/?tts=. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
Succession Planning & the Skills Mix For Manufacturers Event

Succession Planning & the Skills Mix For Manufacturers Event : Two key themes regarding the future of manufacturing are access to appropriate technology and how to develop a team with the appropriate skills to meet the current and future needs of the business – including team members who have grown up with advanced technology and want to use it to drive innovation and product ability improvements within businesses. Hear from a range of speakers about how they have addressed the skills challenge and from a range of skills/training providers and how they can help. This event will be held in collaboration with the West Yorkshire Consortium of Colleges ‘The Skills Service.’ Speakers: Andrew Wright (Reliance Precision)Marie-Claire Micuta (University of Huddersfield)Julie Penman (NPL)Richard Burguete (NPL)Jas Hayre (WYCC)TBA (Cummins) Ahead of this event, NPL’s Product Verification team are offering two one-hour training sessions, one on Micrometers and another on Calipers. Both sessions will take place at 3:30 and 4:30pm alternatively, providing the opportunity to attend both sessions. Please note registration is essential for these training sessions and places are limited. To register your interest, please tick the box ‘Are you interested in training sessions ahead of the event?’ when signing up, so we can contact you. Parking will be available on a first come first serve basis from 5:15pm onwards Complimentary food and drink will also be available. National Physical Laboratory3M Buckley Innovation CentreFirth StreetHuddersfieldWest YorkshireHD1 3BD Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
NPL Manufacturer Measurement Network Event

NPL Manufacturer Measurement Network Event : Succession Planning & the Skills Mix for Manufacturers event is focusing on two key themes regarding the future of manufacturing are access to appropriate technology and how to develop a team with the appropriate skills to meet the current and future needs of the business – including team members who have grown up with advanced technology and want to use it to drive innovation and product ability improvements within businesses. Hear from a range of speakers about how they have addressed the skills challenge and from a range of skills/training providers and how they can help. The event will be held in collaboration with The Skills Service, which is part of the West Yorkshire Consortium of Colleges. Parking will be available on a first-come, first-served basis from 17:15 onwards and complimentary food and drink will also be available. The National Physical Laboratory (NPL) established a Northern hub with the aim of supporting regional manufacturing SMEs to help them to achieve their full potential to become competitive within a challenging worldwide market. NPL will offer its extensive expertise in measurement and product verification related services to help SME Manufacturers to identify appropriate validation methods within their business with the aim of increasing efficiency, reducing waste and improving product quality. The NPL Manufacturer Measurement Network has been created to make this process as simple and seamless as possible – with two levels of membership available. The aim of the Network is to enable the members to benefit from NPL’s expertise with the view of optimising productivity and increasing confidence in their products, keeping their businesses at the forefront of measurement and validation technology. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
New Trade Show Announced for the UK’s Chemical Industry

Industry professionals from all sides of the UK’s chemical and process sector are set to descend on the Yorkshire Event Centre, Harrogate, Yorkshire on May 1st & 2nd 2019, for the brand new, free to attend CHEMUK 2019 UK supply chain expo & speaker programme. The CHEMUK 2019 event will bring together the UK’s chemical processing & chemical product formulation industries, providing an intensive 2-day supply chain sourcing, business networking, intelligence gathering, best-practice & strategy development experience. Designed to introduce new relationships, strengthen existing ones throughout the intersecting layers of the UK’s ‘chemical sector’, the event allows the ‘industry’ to consider the big challenges and opportunities. 2-Day Chemicals Industry Supply Chain Expo CHEMUK 2019 will provide visitor groups with a diverse and impressive showcase of 170+ specialist exhibitors showcasing latest plant, equipment, materials & services supporting the chemicals industries, driving operational performance, efficiency, future-proofing, safety, compliance and more… Speaker Programme Hosted in purpose build ‘open’ theatres, integrated into the busy CHEMUK show floor, the 2-day speaker programme will deliver some 20+ hours of free to attend expert intelligence, best practice and tech-insight ‘snapshots’, to inspire and assist next level processing plant investment & operational strategies for attending groups across the UK chemicals & chemical product sectors. Over a packed 2-day programme, a wide variety of expert contributors and hosted ‘feature sessions’, including leading industry & professional bodies, will seek to address the BIG topics influencing & affecting today’s and tomorrow’s Chemical Processing sector, from Process Automation & Digitalisation to Process Safety & Compliance, from Process Optimisation to Innovations in Flow measurement, Control & Instrumentation and much more…. Harrogate Venue Hosted at the recently completed Yorkshire Event Centre in Harrogate (Leeds City Region), CHEMUK 2019 is located to be equidistant between the crucially important North West, Humber & Teesside chemical cluster regions. In addition, providing easy access for the important Yorkshire-based chemical & bio industries plus good central UK positioning. With FREE ENTRY into all exhibits, features & presentations, plus on-site FREE PARKING, as well as easy access by Rail & Air, the venue provides an easy experience for all visitor groups. Who should visit? CHEMUK 2019 reaches out to ALL key chemicals/chemical product & chemical using industries, targeting Plant Managers & Plant Engineers, Chemical Process Engineers, Operational, HS&E, Control & Instrumentation, Test & Inspection, Manufacturing, Formulation, Logistics, Procurement & Supply Chain, R&D & Scientific professionals plus Chemical industry business teams. Organisers are anticipating attendee groups from across the broad industrial chemicals processing & distribution sectors. From petrochemicals & base chemicals, to fine & speciality, intermediates & additives, polymers, inorganics, dyes, pigments, green chemicals, process chemicals and more. Equally, formulated product processing industries, from the cosmetics & personal care industries to paints & coatings, household & industrial cleaning, pharmaceuticals, water treatment, plastics and others.
