Trucks Safely Drive Themselves To Rotterdam With Driverless Tech

A total of six convoys of semi-automated, smart HGVs arrived safely at Rotterdam’s harbour last week after a European experiment in driverless automation went off without a hitch. Up until recently, the driverless technology has only been used on test tracks over fears to public safety. This month, however, the convoys were deemed fit for highway testing and, with a planned journey from Belgium to Rotterdam via some of Europeâs busiest roads, it was to be a leap of faith for the six participating manufacturers. Despite being some feat, the truck platooning was nevertheless a huge success with the convoys arriving at the port at around midday. The experiment follows the same technological principles as self-driving cars. One truck leads the convoy while the others follow one another at a close, pre-set distance via wireless connection. The leading truck thus determines both route and speed; if the platoon leader brakes, the trucks following it brake in succession. The practice of platooning has a number of distinct advantages over typical human conduction â not least it is considerably safer as it mitigates the risk of human error. Dutch Minister, Melanie Schultz also pointed out that driverless truck platoons have the potential to be much more efficient and more environmentally friendly. Wednesdayâs experiment is the first of its kind and marks the furthest distance successfully travelled by self-driving trucks. The fleet comprised vehicles from six of Europeâs leading HGV manufacturers: DAF, Daimler, Iveco, MAN, Scania and Volvo. Erik Jonnaert, President of ACEA, Europeâs largest automotive trade association, suggested that the success of the pioneering experiment was another step in the journey toward a completely automated automotive industry. He added that the concept could significantly improve traffic flow on the continentâs most congested highways. Of course, the ability to wirelessly connect trucks emerging from different manufactures should also be highlighted. Previously, vehicles produced by different manufacturers have struggled to communicate owing to varying technologies but that standardised link-up between vehicles, has proven successful. In order to ensure safety and override the automation technology should it fail, human drivers were still behind the wheel of the trucks. Even the most avid proponents of driverless technology admit that various problems with the automated systems need to be addressed before it can we rolled out worldwide. Back in March, Chancellor George Osborne expressed his support for driverless technology and confirmed plans to trial the technology at home in the UK. After the success of this pilot study, that reality surely gets ever closer.
Cardiff Gets Set for New Transport Infrastructure

Plans are approved and construction under way on a new road that will connect Cardiff with the east side of the city. The £57.3m project will see the development of a new dual carriageway between Roverway and Cardiff Bay (A4232 Butetown Tunnel), hoped to bring increased mobility as well as congestion relief for those in and around the Welsh capital. Preparatory work has been completed over the last few weeks though construction was launched by Edwina Hart, Welsh Government Minister today. The Eastern Bay Link Road is expected to be completed by spring 2017 and hoped to be a long-term solution to ongoing traffic problems on the cityâs busy Tyndall Street. Amongst improving the transport infrastructure, and thus improving mobility and reducing journey times, the project is also expected to bring a significant economic boost to the city. Edwina Hart suggested that that the Eastern Bay Link Road development would create numerous jobs and apprenticeship opportunities over the next year. In fact, the total number of employment opportunities as a direct result of the build is predicted at in excess of 100. She added that, after completion, the new road would also support wider economic growth by better connecting surrounding regions with the capital and improving access to Central Cardiff Enterprise Zone. The brand new dual carriageway will also integrate a pedestrian footway and cycle path across its entire length. The road will therefore not only benefit road users but also incentivise so-called green travel by encouraging carbon-free travel. The road spells more good news for the region after Chancellor George Osborne announced the Severn Bridge tolls would be halved by 2018 in yesterdayâs budget. Some 13 million vehicles pay for privilege of crossing the Severn Bridge every year and the move will, like the Eastern Bay Link Road, facilitate increased mobility in the country. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
Steel Industry Further Rocked by Chancellor’s Budget

Steel Industry Further Rocked by Chancellor’s Budget : Following the release of the chancellor’s Budget yesterday, businesses have collectively welcomed plans to cut corporation tax, many describing the move as long overdue. With the absence of support for the steel industry however, the release of George Osborne’s annual Budget has also been ravaged by criticism. Corporation tax is set to reduce and will stand at just 17% by 2020, the Chancellor promised yesterday. The 3% cut follows Osborne first tax reform back in 2010 which saw corporation tax slashed from 28% to 20% under the promise of a strong and stable economy with principles of growth and fairness. With that in mind however, Osborne may struggle to pledge his commitment to the same core values. The threshold for business rate tax relief is set to double. And while this will significantly reduce the number of firms paying the levy (with as many as 600,000 firms expected to be newly exempt), many have claimed the change in policy will only benefit SMEs and continue to leave larger companies and OEMs paying an unfair rate of tax. Mike Cherry, Policy Director at the Federation of Small Businesses, concurred: The chancellor has listened to our calls for the tax system to be made simpler for small businesses and the self-employed and taken important action on business rates. In general, business rates will also rise at a far slower rate and will be linked with the consumer index of inflation. Again, the biggest reprieve will be for small businesses who, under current policy, pay rates according to the higher retail prices index. Most talked about however, is what the Chancellor has failed to do. Over the past year, Tata Steelâs Scunthorpe-based manufacturing plant has regularly announced job loses, now totalling over 3,000. Like many others in sector, Tata Steel blames a combination of high energy costs, the increased momentum of the environmental agenda, and an increasingly competitive market overseas. The Chancellor was hoped to alleviate some of those pressures at yesterdayâs budget though failed to make the changes steelworkers are said to so sorely need. Plant and machinery removal will continue to be factored into the calculation of business rates for firms, hiking up the tax considerably for all those in the sector. In many respects, this discourages firms from investing in new facilities or equipment in a bid to keep costs down. In turn, the UK remains behind in the research and development, as well as environmental, stakes; thus begins a cycle in which businesses are wrought by hardship. Various trade associations and firms have emerged to lobby for a U-turn on Osborneâs plans. One waits with baited breath to see what the future of the UKâs steel industry has in store. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
Northern Powerhouse Dream Gets One Step Closer to Reality

Northern Powerhouse Dream Gets One Step Closer to Reality : In a digression from his usual party line on cutting down the national deficit, George Osborne has emerged to express his support for devolution plans which, if they go ahead, will give major Northerns cities greater control over housing, transport, planning and policing. In what is hoped to be the first stage of the “Northern Powerhouse” dream, the Chancellor of the Exchequer is set to back plans for a fast rail line between Leeds and Manchester in this weekâs budget. It was back in October that the ‘Northern Powerhouse’ plan was initially signed off though last weekâs comments were the first real sign of plans coming to fruition. Planned civil works have been drawn up by Transport for the North (TfN), the head of which, David Brown, said development was inevitable and necessary. The route between the two major cities is predicted to be at the top of Lord Adonisâ report for the National Infrastructure Commission. Commentators have suggested the report could well include recommendations of anything from full electrification to a whole new network. TfN has gone further, calling for a 30-mile tunnel to be built under the Pennines in order to link Sheffield and Manchester. The group has suggested the tunnel could slash journeys between the cities by some 30 minutes, as well as alleviating road congestion by providing a more convenient rail service. Five different outline plans have been submitted by the transport body and range from a door-to-door, city centre to centre city route, to one that winds around Manchester to the north-east of Sheffield. The investment has been calculated to represent a £56.6bn increase to size of the northern economy by 2040. It would also include a new fast track rail line, connecting the northern ends of High Speed 2 by 2033. A new 20-mile section linking Liverpool to HS2 would also be built while lines would be upgraded. The National Infrastructure Commission however is understood to be hesitant committing to what would be one of the longest underground routes in the world. The project is forecast to cost some £6bn. Adonis is understood to be concerned about the viability of other major projects such as Londonâs Crossrail 2 if the transport budget is spread elsewhere. Whether the north will ever receive the attention and joined-up treatment as the capital remains to be seen, but Osborneâs latest comments are surely a hopeful sign. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News
